FRENAR
FAPELEC · TOSUNLUXDatasheet — 22 kW wall charger for electric carsfapelec.ma/en/produits/maison-batiment/chargeur-voiture-electrique/ · 22/10/2026
TOSUNLUX 22 kW wall charger for electric cars
Series · Charging station · 22 kW

22 kW wall charger for electric cars

Up to 22 kW · three-phase 400 V · IP55

IEC 61851-1

TOSUNLUX (Tosun) wall-mounted charging station for electric cars, for installation in a garage, villa, company or hotel car park: up to 22 kW three-phase 400 V, charging current adjustable from 10 to 32 A, IP55 housing for indoor and outdoor use, monitoring display and charging cable with vehicle connector.

IEC 61851-1IEC 62196-2
22 kWPower
Three-phase 400 VNetwork
IP55Protection
PDF datasheet

Reference selector

1 references
Compare
Up to 22 kWThree-phase 400 V (360 – 440 V)Adjustable from 10 to 32 AIP55

Technical characteristics

Electrical
Charging powerUp to 22 kW
Power supplyThree-phase 400 V · range 360 – 440 V
Charge currentAdjustable from 10 to 32 A
Current at 22 kW32 A per phase at 400 V (P = √3 × 400 V × 32 A = 22.2 kW)
Single-phase power7.4 kW at 230 V and 32 A
TypeWall-mounted AC charging station, mode 3
Vehicle connector7-contact Type 2
InterfaceFront-panel screen · status light bar
Display“400V-FAST” screen and status lights
Mechanical
MountingWall-mounted · socket holder on the front
Charging cable5 m, attached to the charging station
Environment
IP ratingIP55
Compliance
ManufactureUnder the supervision of TOSUN (Germany) GmbH
Standard / markingIEC 61851-1 · IEC 62196-2
Application
CompatibilityAll electric and plug-in hybrid vehicles with Type 2 socket
Indicative charging time3 h for 60 kWh at 22 kW, if the vehicle's on-board charger accepts 22 kW
InstallationDedicated three-phase line; TOSUN UKP 32 A switch-disconnector upstream
Line protection4P 40 A curve C circuit breaker and 30 mA type A residual current device with 6 mA DC detection (or type B), according to IEC 61851-1 and NF C 15-100
Power cable5G6 mm² copper up to 30 m (to be checked against voltage drop)
  1. 1 Calculated value: P = √3 U I (three-phase) · P = U I (single-phase) · t = E / P (U = 400 V / 230 V, I = 32 A, E = 60 kWh).
  2. 2 Value from an equivalent series, to be confirmed when ordering.
  3. 3 Normative value: IEC 61851-1 · IEC 62196-2.

Documentation

  • DatasheetChargeur mural pour voiture électrique 22 kWFRPDF · 380 kBDownload
  • Datasheetشاحن حائطي للسيارات الكهربائية 22 كيلوواطARPDF · 304 kBDownload
  • Manufacturer certificateQuanpin Certification (CNAS · IAF) · ISO 9001:2015ENWebP · 236 kBDownload

All documents for the series in the documentation centre

Esc
↑ ↓ navigate · ↵ open · Esc close